KD-30-550-900-G1

30W 550/600/650/700/750/800/850/900mA LED Soft start Driver

KD-30-550-900-G1 is a constant current output mode LED Soft start driver. The output current can be easily set via DIP switch.

Features

·The housing is made from V0 flame retardant PC materials.
·Ultra-small, thin and light screwless end cap.
·High performance, high efficiency, low THD.
·Innovative thermal management technology intelligently
 protects the life of the LED driver. 
·Overheat, overvoltage, overload, short circuit protection and automatic recovery.
·Indoor office lighting, decorative lighting and commercial lighting.
·Suitable for ClassⅠ/Ⅱ/Ⅲ indoor light fixtures. 

Technical Parameter

Model KD-30-550-900-G1
Input Efficiency 87%@230VAC, Full load
Voltage 220VAC-240VAC
Frequency 50/60Hz
Power Factor 0.95@230VAC,Full load
THD <10%@230VAC, Full load
Current 0.158Amax@230VAC, Full load
Inrush Current Cold start,28A(twidth=30us measured at 50% Ipeak)@230VAC
Output Current(mA)/Voltage (VDC)/
Power(W)
550mA/9-45VDC/24.75W
600mA/9-45VDC/27W
650mA/9-45VDC/29.25W
700mA/9-42VDC/29.4W
750mA/9-40VDC/30W
800mA/9-37VDC/29.6W
850mA/9-35VDC/29.75W
900mA/9-33VDC/29.7W
Ripple Current <3%
Channel 1
Current Tolerance ±5%
Standby Power <0.5W
No load output voltage 50VDC Max
Turn On Delay Time <3s, at 230Vac
Protection No Load The LED Driver will not be damaged.
Short Circuit No Output, recovers automatically after fault condition is removed
Over Load Hiccup mode, recovers automatically after fault condition is removed
Safety Surge L-N:1KV
Withstand Voltage I/P-O/P: 3000VAC/1min/5mA
Other Working Temp. -20℃~50℃
Storage Temp.; Humidity -40℃~85℃, 20-90%RH
Tc 75℃
Material PC
IP Rating IP20
Lifetime 50,000h@tc:60℃
Warranty Condition 5 years
Switch Cycle >25,000 times
Packing Size 375*330*180mm(L*W*H), 6Kg/Carton/50PCS
Dimensions 145*40*26.5mm(L*W*H)
G.W 110g

Related recommendations