10W 120/150/180/200/240/270/300/350mA LED Soft start Driver
KD-10-120-350-G1 is a constant current output mode LED Soft start driver. The output current can be easily set via DIP switch.
Features
·The housing is made from V0 flame retardant PC materials.
·Ultra-small, thin and light screwless end cap.
·High performance, high efficiency, low THD.
·Innovative thermal management technology intelligently
protects the life of the LED driver.
·Overheat, overvoltage, overload, short circuit protection and automatic recovery.
·Indoor office lighting, decorative lighting and commercial lighting.
·Suitable for ClassⅠ/Ⅱ/Ⅲ indoor light fixtures.
Technical Parameters
Model | KD-10-120-350-G1 |
Input | 85%@230VAC, Full load |
220VAC-240VAC | |
50/60Hz | |
>0.9@230VAC,Full load | |
<10%@230VAC, Full load | |
0.06Amax@230VAC | |
Cold start,18A(twidth=14us measured at 50% Ipeak)@230VAC | |
Output | 120mA/9-42VDC/5.04W 150mA/9-42VDC/6.3W 180mA/9-40VDC/7.56W 200mA/9-42VDC/8.4W 240mA/9-41VDC/9.84W 270mA/9-37VDC/9.99W 300mA/9-33VDC/9.99W 350mA/9-28VDC/9.8W |
<3% | |
1 | |
±5% | |
50V Max | |
<1.5W | |
Protection | after fault removed Close output ,the output current recovers automatically |
When the output voltage is exceeded, the output current decreases and, recovers automatically when the load is reduced. | |
Shut down the output, recovers automatically when temp. back to normal. | |
Other | -20℃~50℃ |
-40℃~85℃, 20-90%RH | |
75℃ | |
PC | |
IP20 | |
30,000h@tc:70℃ | |
3 years | |
>15,000 times | |
375*330*180mm(L*W*H), 4.5Kg/Carton/100PCS | |
125*30*23mm(L*W*H) | |
60g |
Related recommendations